Archives

Wood Insert Installed in Fireplace

November 1, 2016

Lopi, Republic 1250 wood insert installed in masonry fireplace.

Gas Insert Installed in Fireplace

November 1, 2016

Valor G3 Legend, gas insert installed into masonry, wood burning fireplace.

Gas Insert Installed In Wood Burning Fireplace

November 1, 2016

Wood burning fireplace with Valor G3.5 gas insert installed and custom back plate (shroud).

Wood Fireplace Insert into Masonry Fireplace

November 1, 2016

Fireplace Xtrordinair Hybrid-Fyre Large, Rectangle wood fireplace insert installed in masonry fireplace. Note, the existing fireplace opening must have a fairly tall opening to attach the liner on this model.

Gas Insert Installed in Arched, Masonry Fireplace

November 1, 2016

Fireplace Xtrordinair DVS 32 gas insert installed with a customer arch back plate (shroud) to match existing fireplace opening.

Gas Fireplace Insert into Wood Fireplace

November 1, 2016

Fireplace Xtrordinair, DVL 34, gas fireplace insert with hammered Artisan face installed in masonry fireplace.

Gas Fireplace Insert into Wood Fireplace

November 1, 2016

The bottom air gap on the existing wood burning fireplace was removed to fit the largest possible fireplace insert, the Fireplace Xtrordinair, DVL 34. A custom back plate (shroud) was used to provide a clean, built-in look.

Gas Insert into Wood Burning Fireplace

November 1, 2016

Gas insert installed into an existing wood-burning fireplace that had an elaborate, preexisting mantel. Fireplace back plate (shroud) was custom made to fit to barely overlap the edge of molding around the fireplace opening.

Gas Fireplace Insert (With Glass Burner)

November 1, 2016

Installation of Kozy Heat gas insert into a masonry fireplace. Black back panel (shroud) was custom made to fit inside existing brick opening.

Gas Insert into Multi-sided Masonry Fireplace

May 21, 2014

Installation of a gas insert into a corner masonry fireplace. The back panel (shroud) was custom made to cover the smaller fireplace opening to the right. High efficiency inserts only come single-sided and therefore require a custom panel or having the small side bricked in or covered with another non-combustible material.